PVC Flooring Plastic Board Sheet Extrusion Line Single Screw
Extruder
PVC Plastic Sheet Extrusion Line Features
- Even plastication and agglomeration,
- Reliable quality,Long servicing life and direct conversion of powder into plastic
products.
- Equipped with our company's different mould tools down stream
equipment, they can directly produce plastic products like pipes,
rods, plates and profiles.
Sheet Application
Packing industrial, Stationery, Decoration,etc
Product Sheet Line Detail
| Suitable material | Particle | PVC |
Max .width of product | mm | 1220 |
| Thickness of product | mm | 2-5 |
| Extruder capacity | Kg/h | 380 |
| Installed capacity(approx) | kw | 168 |
| Dimension (L*W*H)(approx) | m | 21*4*3.5 |
| Total weight(approx) | t | 17 |
Extrusion Process
1 . Plastic pellets are fed into the barrel of the extruder and
conveyed by the screw, the heaters which are outside of the barrel
of the extruder as well as the friction from the rotation of the
screw melt the plastic pellets into a sheet mold and then placed on
a three-roll calender.
2 . The produced sheet goes through the bottom and middle
roll,wrapping around back of the middle roll and then back to the
top roll or other methods as shown in sheet calender picture, these
rolls are helpful to take the heat out of the sheet.
3 . After the sheet comes off the roll,it moves down the conveyor
to the end of sheet line where the edge trimmer cuts the sheet to
width as well as a sheet shear cutter to length.
Application
1 . Advertisement: such as screen printing, computer lettering, ad
board.
2 . Architeture: such as buliding wall board, decoration board,
housing, office, public buliding interlayer, commercial decoration
shelf, non-dust room board, ceiling plate.
3 . Transportation: such as steamship, aeroplane, carriage, traine
compartment, roof shed, case core layer, inner upholster.
4 . Industry: such as chemical industry antisepticizing project,
thermoforming , for refrigeratory, for temperature keeping, for
environment protection
Product Display
